RM3090E _59 Vehicle Exterior _008792 WINDOW / GLASS _0050247 POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function) J

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function)  Driver Side Power Window does not Operate with Power Window Master Switch  


DESCRIPTION

When the ignition switch is ON, the front power window regulator motor assembly LH is operated by the power window regulator master switch assembly. The front power window regulator motor assembly LH has motor function.

WIRING DIAGRAM

B341300E01
5.052,2.844 5.365,3.042 0.313,0.198 10 J5 5.042,3.01 6.594,3.375 1.552,0.365 10 Power Window Regulator Master Switch Assembly 1.344,2.229 1.656,2.427 0.313,0.198 10 J2 1.333,2.417 3.26,2.771 1.927,0.354 10 Front Power Window Regulator Motor Assembly LH 3.281,0.865 4.51,1.063 1.229,0.198 10 P/W MAIN 0.896,0.688 3.344,0.885 2.448,0.198 10 from POWER Relay 2.521,1.427 2.677,1.625 0.156,0.198 10 U 2.521,1.802 2.677,2 0.156,0.198 10 D 4.979,1.438 5.135,1.635 0.156,0.198 10 U 4.979,1.833 5.135,2.031 0.156,0.198 10 D 4.979,2.26 5.135,2.458 0.156,0.198 10 E 4.979,0.708 5.135,0.906 0.156,0.198 10 B 2.76,1.333 2.917,1.531 0.156,0.198 10 2 2.75,1.719 2.906,1.917 0.156,0.198 10 1 4.781,0.594 4.938,0.792 0.156,0.198 10 6 4.781,1.302 4.938,1.5 0.156,0.198 10 3 4.781,1.698 4.938,1.896 0.156,0.198 10 4 4.771,2.115 4.927,2.313 0.156,0.198 10 1

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY - BATTERY AND BODY GROUND)
a.
B276330C02
0.229,0.896 0.479,1.104 0.25,0.208 1.948,1.052 2.167,0.24 2.167,0.24 2.323,0.24 true 1.01,1.021 0.844,0.51 0.844,0.51 0.698,0.51 true 0.302,0.906 0.615,1.104 0.313,0.198 10 J5 0.104,0.083 0.417,0.281 0.313,0.198 10 *a 2.396,0.156 2.552,0.354 0.156,0.198 10 B 0.563,0.438 1.083,0.646 0.521,0.208 10 E
*a Front view of wire harness connector
(to Power Window Regulator Master Switch Assembly)


Disconnect the power window regulator master switch assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
J5-1 (E) - Body ground Always Below 1 Ω



c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
J5-6 (B) - Body ground Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V



Result:
Proceed to
OK
NG



OK

2.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
a.

Remove the power window regulator master switch assembly.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW MASTER SWITCH>REMOVAL


b.

Inspect the power window regulator master switch assembly.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW MASTER SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY - FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH)

NG

REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW MASTER SWITCH>REMOVAL


3.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY - FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH)
a.

Disconnect the J5 power window regulator master switch assembly connector.


b.

Disconnect the J2 front power window regulator motor assembly LH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
J5-3 (U) - J2-2 (U) Always Below 1 Ω
J5-4 (D) - J2-1 (D) Always Below 1 Ω
J5-3 (U) or J2-2 (U) - Body ground Always 10 kΩ or higher
J5-4 (D) or J2-1 (D) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW REGULATOR MOTOR(for Front Door)>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR